Admin Portal – Device Management

Device Management


Home > Guide library > Administrator portal > Admin Portal – Device Management

Device Management

Administrators can manage and maintain the inventory of phones on the Devices tab of the admin portal.

View Device Status and Detail

To confirm that a phone is effectively communicating with the network, check the device status.

  1. Log in to the admin portal.
  2. Select the Devices tab.
  3. Select the Actions drop-down menu for the device you would like to verify. Choose Device Status. This will perform a status check and once complete, it will display the status of the phone and whether it is registered, aged or unregistered. A registered status is a positive indication of connectivity, all others indicate some issue with the connection between the phone and the network.
  4. Click image for large view

Manually Adding or Removing a Device

To add a device, follow these steps:

  1. Log in to the admin portal.
  2. Select the Devices tab.
  3. Select Add Ported Device.
  4. Click image for large view
  5. The Add a Ported Device window will appear. From here, choose the site where the device is assigned to the Site drop-down menu.
  6. Next, choose the device type from the Device drop-down menu.
  7. Note: You can only choose from the approved devices within your site.

  8. Enter the MAC Address of the device to be added.
  9. Select Save to save your changes. The new device will show up in your device list.
  10. Click image for large view

To remove a Device, you first need to unassign all primary and shared TN assignments. If you have already done this, proceed to the steps below.

  1. From the Devices tab, find the device you would like to remove.
  2. Select the Actions drop-down menu.Then select Remove Device.
  3. Click image for large view
  4. Select Save to save your changes.

Export a List of Devices

To export a list of all the devices assigned to your site select Export. This will export the information as a .csv file and will include each MAC address, device type, available lines and site.

Click image for large view

Import a List of Devices (Bulk Upload of Devices)

You can also import a list of already existing devices as a bulk upload to the portal. Review the list of supported devices found on https://www.centurylink.com/business/voice/hosted-voip.html before adding an existing device. Also, before performing a bulk upload, it is advised to download the .csv template found in the Import drop-down menu along with the list of supported devices and list of sites for better bulk upload results. You can also view the instructions for this process from the drop-down menu list.

Click image for large view

Once you have created and saved the .csv file, you are ready to perform the bulk upload.

  1. Select the Import drop-down menu.
  2. Select Upload .CSV File and select the file to upload. The system will validate the records. If there are any problems, the system will display the result with the corresponding error message.
  3. A notification will appear once the upload is successful and the devices will be added to your inventory. Once they pass validation, they will be ready to be assigned to users.